Image via Wikipedia

Utah Inspections on Permanent Foundations Guide for Manufactured Housing are done by Ludlow Engineering and Land Surveying.

Located in Central Utah we are able to access most the the State of Utah for Foundation inspections.  We inspect the foundations of manufactured homes and give our professional opinion of the existing structure.

This process is estimated between $250-$450, depending upon the size and location of the home.  Our real sales point is this – Our firm guarantees that all of our observations and reports will be delivered within 48 hours or our clients receive a 20% discount.  We are that confident in our work and turn around time to accomplish this last minute requirement for house funding.

Call Now at 435.623.0897 for us to inspect your home today.  Again Call 435.623.0897

Sample of Wording found in Engineering Report

November 5, 2009

Dear

It is understood and agreed that this inspection & evaluation by Ludlow Engineering is of readily accessible areas of the building and is limited to visual observation and apparent conditions existing at the time of the inspection.  This report is not intended and should not be considered as a certification and/or guarantee of the work performed.

Based on your request, this inspection was made on November 5, 2009 to check the integrity and status of the structural foundation system.

The manufactured home was rectangular in shape, measuring approximately 27’-0” x 41’-10”.  It is supported along its entire perimeter by an 8” concrete foundation wall.  Looking through the crawl space, the home was supported at the underside by (4) steel I-beams running the length of the building.  Steel Jacks support the I-beams at approximately 5 feet o.c.

During our observation, steel hold-down straps were inspected and appear to have been installed according to minimum standard requirements.  Said Straps are tied to the I-beams and a concrete block.  The footings that supported the jacks appeared to be adequate in size.

During the inspection, it was noted that a covered patio was installed.  The covered patio was constructed with a post and beam system.  The roof has been attached to the existing home.  The covered patio is approximately 8’-5”x 36’-10”.  The tributary width that is supported by the home is 4’-3”.  The rest of the load is transferred to the ground by columns and placed on a footing system under the concrete patio.  I inspected the inside of the home and did not view any stress on the home due to the additional load.  It appears the home is stable.  It is our opinion, that the cover patio has not affected the structural stability of the home.

The residence’s foundation system appears to be in satisfactory condition with no sign of stress and meets minimum building standard requirements, including Permanent Foundations Guide for Manufactured Housing published in September 1996 and Mona City building requirements.

If we can be of any further assistance, please feel free to contact us.

Sincerely,

LUDLOW ENGINEERING

FHA Foundation Inspections

One of the requirements to purchase or sell a manufactured home, also known as a mobile home, is a HUD / FHA Foundation Inspection made by a Professional Engineer.

These inspections are done on-site by a professional engineer who analyzes the home and foundation setting.

Once the home is inspected, the engineer is required to write an Engineer’s letter as the findings of the foundation and the integrity of the foundation.

For your foundation estimate call today at Ludlow Engineering and Land Surveying, (435) 623-0897.

Manufactured Home Inspections are what we do.  We have specialized the process of getting in and out for Manufactured Home inspections.

Article Source: http://EzineArticles.com/?expert=Ed_Harrison

Manufactured Home Foundation Inspections

We are a full-time Civil Engineering Firm who are hired to inspect manufactured home foundations.  We inspect the placement of the home on the foundation according to HUD standards and regulations.

Brett Ludlow, PE from our staff  in the supervising engineer of our manufactured home inspection division.  Call today and speak with Brett about your inspection.

One other cool aspect of our services is we get the job done quickly.  We pride ourselves in meeting your deadline, so that the transaction is not delayed.

Call today at (435) 623-0897

Article Source: http://EzineArticles.com/?expert=Ed_Harrison

Manufactured Home Hud Certified Foundation Inspections

A manufactured Home HUD foundation Inspection is usually required at the time of selling or buying a manufactured home.

The required foundation inspection is completed by a professional engineer who certifies to the observations of the structure.  The engineer provides a detailed explanation of straps, tie-downs and general manufactured home details.

Ludlow Engineering and Land Surveying completes Manufactured foundation inspections on a daily basis.  Located in center Utah we are able to inspect the entire State of Utah with ease.

Call Today for your estimate on a HUD Foundation Inspection in Utah -

435-623-0897>>

FHA Inspections In Utah

Ludlow Engineering a Full Civil Engineering and Land Surveying firm specializes in FHA Manufactured home foundations inspections.

Are You closing on a Manufactured Home?

Are you representing those who are closing on a manufactured home?

These questions, if answered in the affirmative, then we can help.  We pride ourselves in turning these inspections around in record time.  We know that either you or a client has just a few more hoops to jump through and you are done.

Call Today to get your record setting turn around time on your manufactured home foundation inspection.  Call (435) 623-0897

Salt Lake City – FHA Foundation Inspection

Call Now at 435.623.0897 for us to inspect your home today.  Again Call 435.623.0897

Sample of Wording found in Engineering Report

November 5, 2009

Dear

It is understood and agreed that this inspection & evaluation by Ludlow Engineering is of readily accessible areas of the building and is limited to visual observation and apparent conditions existing at the time of the inspection.  This report is not intended and should not be considered as a certification and/or guarantee of the work performed.

Based on your request, this inspection was made on November 5, 2009 to check the integrity and status of the structural foundation system.

The manufactured home was rectangular in shape, measuring approximately 27’-0” x 41’-10”.  It is supported along its entire perimeter by an 8” concrete foundation wall.  Looking through the crawl space, the home was supported at the underside by (4) steel I-beams running the length of the building.  Steel Jacks support the I-beams at approximately 5 feet o.c.

During our observation, steel hold-down straps were inspected and appear to have been installed according to minimum standard requirements.  Said Straps are tied to the I-beams and a concrete block.  The footings that supported the jacks appeared to be adequate in size.

During the inspection, it was noted that a covered patio was installed.  The covered patio was constructed with a post and beam system.  The roof has been attached to the existing home.  The covered patio is approximately 8’-5”x 36’-10”.  The tributary width that is supported by the home is 4’-3”.  The rest of the load is transferred to the ground by columns and placed on a footing system under the concrete patio.  I inspected the inside of the home and did not view any stress on the home due to the additional load.  It appears the home is stable.  It is our opinion, that the cover patio has not affected the structural stability of the home.

The residence’s foundation system appears to be in satisfactory condition with no sign of stress and meets minimum building standard requirements, including Permanent Foundations Guide for Manufactured Housing published in September 1996 and Mona City building requirements.

If we can be of any further assistance, please feel free to contact us.

Sincerely,

LUDLOW ENGINEERING

FHA Foundation Certification – Utah

Ludlow Engineering performs FHA inspections on modular homes throughout the State of Utah.

Call today for your estimate.

HUD-FHA-VA Loan Requirements For Manufactured Homes – Permanent Foundations and Gaining Compliance

How can I gain compliance with the HUD/FHA requirements for my manufactured home permanent foundation?

According to federal regulations, in order to meet the requirements for a manufactured home permanent foundation you must comply with the Permanent Foundations Guide for Manufactured Housing, (HUD-7584), dated September 1996.

ALL foundation certifications for manufactured homes require an inspection to determine compliance.

At a minimum, there are several compliance issues that must be met; these are:

A permanent skirting around the perimeter.
Permanent piers to support the structure.
Anchorage to resist loads caused by wind and earthquake forces.
And others…

A professional engineer in the state where the house is located must certify that the foundation is in compliance, or non-compliant. Each M.H. is site specific, and loan specific; so there is not cookbook scenario. Each M.H. must be evaluated separately.

So, you probably say, “Why is a professional licensed engineer required for a foundation certification?”. I’m glad you asked.

Foundation systems are a complex engineering design process. In order to safeguard, life, health and property, to promote the public welfare, and to establish and maintain a high standard of integrity and practice, a professional licensed engineer is required.

An experienced engineer that is familiar with the manufactured home industry can evaluate the M.H. and determine whether the foundation is in compliance to HUD standards. However, every engineer does not necessarily have the experience to properly evaluate the site and determine its standing with HUD. It takes a knowledge of the HUD code book (which most engineers are not even aware of) and a keen knowledge of the manufactured housing building industry.

A particular manufactured (mobile) home could be in compliance as-is. However, you can’t necessarily make that determination until an on-site inspection is completed. It is a wise to remember that before you start trying to retrofit an existing M.H. to bring it up to HUD’s Permanent Foundation Standards, you need to hire an experienced Engineer familiar with M.H. foundation certifications from day one. It can save a lot of time, and money.

Dr. David Blumenthal, National Coordinator for Health Information Technology, Department of Health and Human Services
Video Rating: 3 / 5

We strive to work closely with the real estate and mortgage companies throughout Utah.  There are often many items which need to be done before a house closes with title.  Here at Ludlow Engineering we can serve our clients with most of them.

• Land Title Survey – A Land title survey surveys the property to ensure the home and other valuables have been placed correctly within the property lines.
• Boundary Surveys – Similar to a Land Title, but more simple.
• ALTA Land Survey – The Cadillac of surveys.  Topography, utilities, neighbor names, access, title search are all elements of an ALTA survey.  This survey is certainly recommended for all business and commercial sites and large home sites.
• Foundation Inspections for Manufactured homes. If you are selling or buying a manufactured home, most mortgage companies require a foundation inspection of those properties.  We can perform those inspections and have it turned back into the mortgage company within 76 hours from a signed contract.
• House structural review and report.  If you are building a home, we can structurally engineer your home for you.  Working together with your architect or draftsman, we can accomplish the  coordination of getting your plans prepared for city or county submittal.

Call Now to learn about the other services we perform here at Ludlow Engineering.  Our phone number is 435-623-0897.