Utah County | Ludlow Engineering and Land Survey

Utah County Land Surveyors

September 13, 2011 | Comments Off

Image via Wikipedia

Utah County Land Surveyors

When looking for a Utah County Land Surveyor, we can offer the most affordable services in the business. Located just South Of Utah County, we can offer quick response times to anywhere in the county.

We offer the following services in Utah County:

ALTA Surveys
Boundary Land Surveys
As-built surveys
Topography surveys
Construction Staking Surveys
Fenceline Agreement Surveys
And Much Much More.

Call our office today at (435) 623-0897 to speak to a Land Surveyor.

Boundary Survey in South Salt Lake Utah (ludlowengineers.com)

_{»crosslinked«}

FHA Modular Home Inspections Utah County

November 22, 2010 | Comments Off

: Image via Wikipedia

FHA Modular Home Inspections Utah County

Here at Ludlow Engineering we are professional engineers who desire to take care of you as our clients. Being that we inspect FHA modular home foundations, we thought it may be fun to share a few articles that we have read. Enjoy!

Call For Your Home Inspection>>

This is the second in a two-part series that answers many of the questions a typical prospective client asks when first beginning to understand the many benefits offered by modern, modular home building technology. Whereas the first article focused more on aesthetics, this article gets more into the technical issues of the home building process.

Q: Do I need to engage an architect to take advantage of this technology?

A: Not unless you wish to engage an architect for a specific purpose. Some discerning clients may engage an architect to assist with floor plan, exterior appearance or site elements that are neither designed nor built in the factory. However, most manufacturers employ a qualified engineer to seal the final building plans, eliminating the need for architectural construction drawings.

Q: I have been told a modular home frame contain nearly 30% more lumber than a conventional, site-built house. Please explain?

A: The components built within the factory must be built sufficiently strong to withstand the rigors of over-the-road transport to your home site, where they are lifted with a crane onto your foundation. This increased strength translates into a better constructed home for you.

Q: Are there other elements of the manufacturing process that creates a better constructed house than traditional site-built homes?

A: Yes. The engineering design and controls are key elements to the manufacturing process that are not available on a traditionally built home job site. The finished house from a quality manufacturer should have straighter walls and ceilings with less potential for visible signs of settling. Straighter walls with less likelihood to be affected by settling should also mean better functioning doors as your foundation settles. Certain manufacturers use a hi-tech method of securing the drywall to the studs to improve performance which minimizes settling nail pops. A quality manufacturer will employ a third party engineering firm to provide quality control checks throughout the manufacturing process.

Q: What are the energy efficiencies of modular housing compared to traditional, “site-built” construction?

A: Contemporary homes built with factory manufactured components generally enjoy a high efficiency rating from utility companies; air infiltration is minimized due to the engineering process. Some manufacturers build “green” with its design and construction process that saves energy and natural resources by minimizing waste and recycling materials. At least one known manufacturing plant is Energy Star certified to build its components and certify them in the factory as Energy Star qualified, only then requiring a HERS rater on-site to finalize the certification. The factory process has less of a negative environmental impact on the home site. A “green” modular home uses less energy, water and natural resources.

Q: Will my modular home be built and ready for occupancy any quicker than if I were to build with traditionally methods?

A: Yes, generally in half the time. The components for most homes are typically completed in the factory within seven days, ready for delivery to your site. Once the components are delivered and set at your site, a seasoned builder should be able to perform utility connections, exterior and interior finishes and related improvements to deliver your home “turn-key”, typically within 60 to 90 days. You should allow for additional time up-front to finalize your design and selections.

Q: Are modular homes subjected to municipal inspections?

A: Depending on your state and local requirements, your zoning, civil engineering and your building plans must generally be approved by the local municipality to secure a building permit, no different than traditional construction. Once your foundation is built, it must be approved by the local code official. During construction in the factory, the manufacturer employs a certified third-party inspector who will certify, upon completion, that your building components have been manufactured in accordance with the approved plans and conforms to all municipal and state code requirements. Once set on your foundation and finished to turn-key by your builder, a final inspection of your home will generally be required by the local code official.

Q: Can modular home components be utilized in an expansion project?

A: Possibly. An experienced builder can initially project floor plans and architectural styles for your expansion. However, your existing structure and its foundation must be certified by a structural engineer that it can support the manufactured components. Provided your engineer concludes affirmatively, you can be assured that your project, utilizing this technology, will be completed in less time and at a lower cost than conventional site-built construction, all other things being equal.

Q: If we have a small house and are considering building bigger, should we consider tearing it down and rebuilding with a new modular home?

A: In our experience, in many instances, a client would be better to consider demolishing and rebuilding for a number of reasons. Unless your existing home has some characteristics that you want to preserve, in most instances your existing house does not have the features many people desire with modern architecture. Notably, high ceilings, two-story ceiling heights, contemporary floor plans, functional basements that can accommodate 8 foot minimum finished ceiling height, and other modern features.

Q: Is a modular home difficult to finance?

A: No! Financing a well built modular home is no different than financing traditional construction. Residential lenders are all very well informed and, quite frankly find it appealing to finance a modular home. The construction lender knows that when it advances it first draw, the home is nearly complete, thereby minimizing any chance of the house not reaching completion. The same educated lenders also understand the superiority of construction utilizing this technology for home building.

http://www.southviewhomes.com – A leading modular home builder in central and southern New Jersey, Southview Homes represents Westchester Modular Homes.

Article Source: http://EzineArticles.com/?expert=Richard_Wojewodzki

Land Surveys in Provo – Utah County

November 11, 2010 | Comments Off

: Image via Wikipedia

Land Surveys in Provo – Utah County

Land Survey In Provo Can be accomplished fast and easy with the hiring of Ludlow Engineering and Land Surveying.

Ludlow Engineering and Land Surveying can complete any land survey project large and small. Being licensed land surveyors and engineers for over 40 years we know how to get the job done right. Call us today for your Land Survey.

Call (435) 623-0897 Today!!

Article of the Day

Architectural And Engineering Outsourcing For High Definition Surveying In The Philippines

High Definition Surveying and Point Cloud Conversion services are among the four major services offered by Digiscript Philippines, Inc. to its clients. This is along with Building Information Modeling or BIM, 2D CAD Production Support and 3D Visualization. The Leica Scanstation of Leica Geosystems is used by Digiscript Philippines, Inc. for its High Definition Surveying. This is in addition to the other advanced digital technologies it utilizes, such as Leica Geosystems’ Point Cloud, Cloudworx and Cyclone applications. The company also uses Revit Architecture, Revit MEP, 3DSMax and AutoCAD of the Autodesk software suite.

High Definition Surveying has totally changed the way that surveying is being done in the physical world. In the old way, surveyors had to go to the areas to be surveyed and do the physical measurements themselves. There are many possible problems that they could encounter. The area could have hostile elements that could endanger their lives. The sites to be surveyed could have a complicated topography that presents much difficulty for measuring. Errors in measurement could result in the need to redo the entire survey. This could expose the surveyors again to new danger. The old survey methods are also very expensive.

With High Definition Surveying, a laser beam is simply swept across the area to be surveyed. As this is happening, minute but exact and complete measurements are already being made and collected in the hundreds of thousands. These are also automatically and immediately stored in the computer. When the data is interpreted by the computer, a detailed and very precise three dimensional representation of the area surveyed appears. The result is as crisp as a photograph but the difference is that this three-dimensional image can be navigated on the computer. In other words, the viewer can walk through it or around it, or fly over it. The area surveyed could be a geographical site or even a building or any other structure such as a boat or an airplane.

When using High Definition Surveying, the surveyors can do the surveying discreetly and remain unobtrusive and safe if the area happens to be hostile. The quickness of the process can take them away from the area before any complications occur. There is no problem no matter how convoluted the site is. The results are so accurate that a repeat is almost never necessary. In addition to all these benefits, High Definition Surveying is even less expensive than the old surveying methods.

The output of High Definition Surveying is so correct and comprehensive that the professionals who use it can be sure of the best for their project. High Definition Surveying is used by CAD professionals, architects, civil engineers, contractors, plant designers, archaeologists and forensic investigators for site and engineering surveys; topographic and detail surveys; conceptual design and interference checking; profiles, volumes, and area calculations; fabrication and construction inspection; as-builts for retrofits and remodeling; manufacturing and reverse engineering; asset management; architectural preservation and replication; historical and legal archiving; archaeological documentation and crime and accident investigation.

High Definition Surveying in Point Cloud Conversion is indeed a service that Digiscript Philippines, Inc. can be proud of in addition to its Building Information Modeling or BIM, 2D CAD Production Support and 3D Visualization and Imaging which includes photorealistic renderings, photomontages, site animations, site integrations, site overlays, animated presentations, animated walkthroughs and fly-by’s and audio visual presentations.

Digiscript Philippines, Inc. wields technical expertise, excellent service and synergized work processes in meeting all the architectural and engineering outsourcing needs of its clients worldwide. It will always work for its clients’ complete satisfaction. There is no better partner you can find for your architectural and engineering outsourcing.

High Definition Surveying and Point Cloud Conversion services are among the four major services offered by Digiscript Philippines, Inc. to its clients. This is along with Building Information Modeling or BIM, 2D CAD Production Support and 3D Visualization. The Leica Scanstation of Leica Geosystems is used by Digiscript Philippines, Inc. for its High Definition Surveying. This is in addition to the other advanced digital technologies it utilizes, such as Leica Geosystems’ Point Cloud, Cloudworx and Cyclone applications. The company also uses Revit Architecture, Revit MEP, 3DSMax and AutoCAD of the Autodesk software suite.

High Definition Surveying has totally changed the way that surveying is being done in the physical world. In the old way, surveyors had to go to the areas to be surveyed and do the physical measurements themselves. There are many possible problems that they could encounter. The area could have hostile elements that could endanger their lives. The sites to be surveyed could have a complicated topography that presents much difficulty for measuring. Errors in measurement could result in the need to redo the entire survey. This could expose the surveyors again to new danger. The old survey methods are also very expensive.

With High Definition Surveying, a laser beam is simply swept across the area to be surveyed. As this is happening, minute but exact and complete measurements are already being made and collected in the hundreds of thousands. These are also automatically and immediately stored in the computer. When the data is interpreted by the computer, a detailed and very precise three dimensional representation of the area surveyed appears. The result is as crisp as a photograph but the difference is that this three-dimensional image can be navigated on the computer. In other words, the viewer can walk through it or around it, or fly over it. The area surveyed could be a geographical site or even a building or any other structure such as a boat or an airplane.

When using High Definition Surveying, the surveyors can do the surveying discreetly and remain unobtrusive and safe if the area happens to be hostile. The quickness of the process can take them away from the area before any complications occur. There is no problem no matter how convoluted the site is. The results are so accurate that a repeat is almost never necessary. In addition to all these benefits, High Definition Surveying is even less expensive than the old surveying methods.

The output of High Definition Surveying is so correct and comprehensive that the professionals who use it can be sure of the best for their project. High Definition Surveying is used by CAD professionals, architects, civil engineers, contractors, plant designers, archaeologists and forensic investigators for site and engineering surveys; topographic and detail surveys; conceptual design and interference checking; profiles, volumes, and area calculations; fabrication and construction inspection; as-builts for retrofits and remodeling; manufacturing and reverse engineering; asset management; architectural preservation and replication; historical and legal archiving; archaeological documentation and crime and accident investigation.

High Definition Surveying in Point Cloud Conversion is indeed a service that Digiscript Philippines, Inc. can be proud of in addition to its Building Information Modeling or BIM, 2D CAD Production Support and 3D Visualization and Imaging which includes photorealistic renderings, photomontages, site animations, site integrations, site overlays, animated presentations, animated walkthroughs and fly-by’s and audio visual presentations.

Digiscript Philippines, Inc. wields technical expertise, excellent service and synergized work processes in meeting all the architectural and engineering outsourcing needs of its clients worldwide. It will always work for its clients’ complete satisfaction. There is no better partner you can find for your architectural and engineering outsourcing.

Retrieved from “http://www.articlesbase.com/file-types-articles/architectural-and-engineering-outsourcing-for-high-definition-surveying-in-the-philippines-1941638.html”

(ArticlesBase SC #1941638)

WebDotcom LocalSeo888 -
About the Author:

DigiScript Philippines Inc.

#4th Floor BT&T Center,

No. 20 E. Rodriguez Jr. Ave.

Libis, Quezon City

Philippines Tel. No.: (632) 439 2677

Fax No.: (632) 709 2014

E-mail: info@digiscriptinc.com

Website: www.digiscriptinc.com

]]>

Rate this Article

1
2
3
4
5

vote(s)
0 vote(s)

Feedback
RSS
Print
Email
Re-Publish

Source: http://www.articlesbase.com/file-types-articles/architectural-and-engineering-outsourcing-for-high-definition-surveying-in-the-philippines-1941638.html

Article Tags:
animation, visualization, imaging, cad, photorealistic renderings, building information modeling, point cloud, revit architecture, architectural outsourcing, high definition surveying, renderings, photomontage, 3dsmax, autocad, leica scanstation